The magnetic flap level gauge is a key instrument for liquid level meter detection. It is a two-color magnetic flip column with a magnetic float controller to identify the liquid level indicator. It can be used in all kinds of towers, tanks, tanks, and spheres. Detection of chemical substance level indicators of machinery and equipment such as containers and heat treatment furnaces. Therefore, grasping its basic principles according to this design concept is relatively popular: the magnetic flip-column liquid level transmitter uses top-mounted or side-mounted inlet valve tube when accurately measuring liquid.
The main body of the magnetic turning column is refitted with the turning column liquid level indicator, the float level gauge and the liquid level transmitter. The magnetic control module is placed inside the pressure controller of the centrifugal water pump or connected to the pressure controller of the centrifugal water pump according to a small chain. When the pressure controller of the centrifugal water pump is connected to the magnetic control module and the liquid level indicator changes, the magnetic pattern (magnetic flap The hook) rotates; the liquid level gauge with a magnetic float ball is in line with the attitude of the liquid structure; in addition, the water level sensor outputs a standard changing resistance signal under the action of the centrifugal water pump pressure controller with magnetism, and then undergoes a smart transmitter to convert the resistance signal Output signal into total flow of 4-50 meters.
The use of the magnetic flap level gauge complies with the basic law of the float and the principle of magnetism must be connected to the storage tank according to the flange. In the whole process of accurate measurement, the two-color cylindrical magnetic float ball inside the machine and equipment will change under the harm of electromagnetic field, and the place where the float ball meets is the specific level meter of the storage tank.
In the whole process of installing machinery and equipment, it is necessary to prevent the presence of magnetically conductive chemicals around the machinery and equipment, and to clarify the electrical heating temperature based on the material condition. Under the condition that the gas-high-performance liquid-phase perforated connection is very large, the flange must be installed in the middle of the Sanchang liquid level transmitter. In the whole process of the adjustment of machinery and equipment, the magnetic column must be adjusted to milky white with magnetic tile dental braces, and then the liquid phase shut-off valve [] and the high-efficiency liquid phase shut-off valve must be opened in turn. And observe the level gauge lift. When the liquid level meter in the tested vessel lifts, the magnetic float ball in the liquid level transmitter itself also follows the elevator. The rare earth permanent magnet steel in the float ball is transmitted to the magnetic turning column indicator according to the magnetic coupling, and the driver is red. , The white turning column rotates, when the liquid level meter rises, the turning column changes from milky white to bright red, when the liquid level meter lowers, the turning column changes from bright red to milky white. The white and red intersection of the indicator is the specific height of the liquid level meter inside the vessel. Aspect ratio, and then complete the clear marking of the level gauge. It can ensure high sealing performance, anti-leakage and suitable for high temperature, high pressure and corrosion resistant places. It has more advantages for high temperature, high pressure, toxic, hazardous, and strong corrosive substances. In direct contact with the substance, the tightness regulations of the water pump pressure switch must be strict, and the viscous substance cannot be accurately measured.
Copyright © Hengshui Aohong Special Glass Manufacturing Co., Ltd. All Rights Reserved | Sitemap
